Have you misplaced your car keys and are seeking a means to unlock the steering wheel without a key? This might be one of the most tricky as well as common situations prevalent in one’s life.
You will learn how to unlock the steering wheel without a designated key.
Let us get started right away.
Why do the steering wheels get locked?
The real reason as to – the steering wheel getting locked is for safety reasons.
This is very beneficial when travelling with kids, as it can help them feel safe when the car is parked.
It also helps in avoiding theft and robbery.
It prevents theft when you leave your car unattended.
Tools required for unlocking the steering wheel?
1) WD40 :
It stands for “Water displacement at the 40th attempt.”
It has anti-corrosion properties and is made using a blend of lubricants.
It is used as a lubricant, rust preventive, penetrant, and moisture displacer. It can also be used for long-term rust protection, blocking rust and corrosion for up to 1 year outdoors or 2 years indoors.
2) A paper clip
How to Unlock Steering Wheel Without Key?
If you are unable to turn your car’s steering wheel, it is likely that it has become locked owing to something interfering with the ignition system.
Step 1) Find the Ignition Cylinder.
When you insert the key into the ignition, the ignition cylinder holds it tightly. It is located near the dashboard on the left side of the steering column.
Step 2) Insert a flat-head screwdriver into the little hole on the cylinder’s side. Insert the screwdriver until it clicks, then remove the cylinder.
Step 3) Insert a small pin or paperclip into the little hole on the cylinder’s back side. Push the pin or paperclip into the steering wheel until you hear a “click” sound .
If your steering wheel is still not able to get unlocked , you should see a mechanic or car repair shop to determine the cause of the problem.
Method 2 –
Follow these steps to unlock the steering wheel using WD40 –
Step 1) Wait a few minutes after spraying WD-40 on the lock mechanism.
Step 2)Insert a thin metal device, such as a paperclip or thin screwdriver, into the lock mechanism and swivel it to unlock the steering wheel.
Step 3) If the lock remains stuck, liberally spray WD-40, until the lock unlocks.
Step 4) If the lock remains stuck, you may need to replace it or take it to a professional locksmith.
Replacing your car’s ignition system might be a difficult task, but it is doable with the correct knowledge and tools. The following are the procedures you must take to unlock the steering:
Step 1) Locate the ignition switch by removing the plastic trim surrounding the steering column.
Step 2) Remove the nuts that connect the ignition switch to the steering column with a tool.
Step 3) Remove the ignition switch and disconnect the electrical harness.
Step 4) Install the replacement ignition switch in the steering column and tighten the screws.
Step 5) Connect the new ignition switch to the electrical harness.
Turn the ignition to the “on” position.
Step 6) Examine the new ignition switch to confirm that the steering lock is released and that the vehicle starts with the key.
Replace the steering column’s plastic trim.
Using an ignition replacement system, you should be able to successfully release your car’s steering by following these steps. If you encounter any problems, seek the advice of an experienced mechanic.
After reading this blog, you should have a clear understanding of how to unlock the steering wheel without a key. Although these measures are practically applicable, one must always maintain precaution and keep the key of a car safe with oneself. Only in case of emergencies, such a mechanism of unlocking the steering wheel – without a key should be undertaken.
If you have any questions, please leave them in the comments section below.